使用电解紫铜材质。
更好的导电性和机械强度，更坚固耐用。
经过退火处理，已确保更好的韧性和容错率。
在不稳定的使用环境中，端子必须提供可靠的连接，退火在避免端子结合部之间的破裂或断裂方面起着至关重要的作用。
导体容易插入，并且铜管长度更方便工具压接。采用电解镀锡处理，以避免氧化。
| Available range | Item No. | Dimensions (mm) | ||
| W | F | L | ||
Cross-section: 0.75-1.5mm² A.W.G.: 22~16 Imax=19A Surface handling: Tin / 3μ Annealing: Yes H=4.8 d1=1.7 D=3.4 T=0.8 | DBN1.25-9 | 2.8 | 9.0 | 13.8 |
| DBN1.25-10 | 2.3 | 10.0 | 14.8 | |
| DBN1.25-11 | 3 | 11.0 | 15.8 | |
| DBN1.25-11S | 2.3 | |||
| DBN1.25-13 | 3 | 13.0 | 17.8 | |
| DBN1.25-13S | 2.3 | |||
| DBN1.25-14 | 3 | 14.0 | 18.8 | |
| DBN1.25-14S | 2.3 | |||
| DBN1.25-18 | 2.2 | 18.0 | 22.8 | |
| DBN1.25-18S | 2 | |||
| Available range | Item No. | Dimensions (mm) | ||
| W | F | L | ||
Cross-section:1.5-2.5mm² A.W.G.: 16~14 Imax=27A Surface handling: Tin / 3μ Annealing: Yes H=4.8 d1=2.3 D=4.0 T=0.8 | DBN2-9 | 2.8 | 9.0 | 13.8 |
| DBN2-10 | 2.4 | 10.0 | 14.8 | |
| DBN2-13 | 2.4 | 13.0 | 17.8 | |
| DBN2-13L | 3 | |||
| DBN2-14 | 2.4 | 14.0 | 18.8 | |
| DBN2-14L | 3 | |||
| DBN2-18S | 2 | 18.0 | 22.8 | |
| DBN2-18 | 2.2 | |||
| DBN2-18L | 2.8 | |||
| Available range | Item No. | Dimensions (mm) | ||
| W | F | L | ||
Cross-section: 4-6mm² A.W.G.: 12~10 Imax=48A Surface handling: Tin / 3μ Annealing: Yes H=6.0 d1=3.4 D=5.5 T=1.0 | DBN5.5-10 | 2.8 | 10.0 | 16.0 |
| DBN5.5-14S | 4 | 14.0 | 20.0 | |
| DBN5.5-14 | 4.5 | |||
| DBN5.5-18S | 2 | 18.0 | 24.0 | |
| DBN5.5-18 | 4.5 | |||
Copper tube crimping lugs
下载
